YOKOGAWA AQ6373 User Manual Download Page 355

Page: 355 / 358

App-50

IM AQ6373-01EN

Restricted Uses.

The SOFTWARE is not designed or intended for use or resale in hazardous environments requiring fail-safe performance,

such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, or other devices or systems

in which a malfunction of the SOFTWARE would result in foreseeable risk of injury or death to the operator of the device or system, or

to others.

Restricted Functionality.

You are licensed to use the SOFTWARE to provide only the limited functionality (specific tasks or processes) for

which the DEVICE has been designed and marketed by YOKOGAWA METERS & INSTRUMENTS CORPORATION. This license

specifically prohibits any other use of the software programs or functions, or inclusion of additional software programs or functions, on

the DEVICE.

Security Updates.

Content providers are using the digital rights management technology (“Microsoft DRM”) contained in this SOFTWARE

to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is

not misappropriated. Owners of such Secure Content (“Secure Content Owners”) may, from time to time, request MS, Microsoft

Corporation or their subsidiaries to provide security related updates to the Microsoft DRM components of the SOFTWARE (“Security

Updates”) that may affect your ability to copy, display and/or play Secure Content through Microsoft software or third party applications

that utilize Microsoft DRM. You therefore agree that, if you elect to download a license from the Internet which enables your use

of Secure Content, MS, Microsoft Corporation or their subsidiaries may, in conjunction with such license, also download onto your

DEVICE such Security Updates that a Secure Content Owner has requested that MS, Microsoft Corporation or their subsidiaries

distribute. MS, Microsoft Corporation or their subsidiaries will not retrieve any personally identifiable information, or any other

information, from your DEVICE by downloading such Security Updates.

NetMeeting/Remote Assistance/Remote Desktop Features.

The SOFTWARE may contain NetMeeting, Remote Assistance, and Remote

Desktop technologies that enable the SOFTWARE or other applications installed on the Device to be used remotely between two or

more computing devices, even if the SOFTWARE or application is installed on only one Device. You may use NetMeeting, Remote

Assistance, and Remote Desktop with all Microsoft products; provided however, use of these technologies with certain Microsoft

products may require an additional license. For both Microsoft products and non-Microsoft products, you should consult the license

agreement accompanying the applicable product or contact the applicable licensor to determine whether use of NetMeeting, Remote

Assistance, or Remote Desktop is permitted without an additional license.

Consent to Use of Data.

You agree that MS, Microsoft Corporation and their affiliates may collect and use technical information gathered in

any manner as part of product support services related to the SOFTWARE. MS, Microsoft Corporation and their affiliates may use this

information solely to improve their products or to provide customized services or technologies to you. MS, Microsoft Corporation and

their affiliates may disclose this information to others, but not in a form that personally identifies you.

Internet Gaming/Update Features.

If the SOFTWARE provides, and you choose to utilize, the Internet gaming or update features within the

SOFTWARE, it is necessary to use certain computer system, hardware, and software information to implement the features. By using

these features, you explicitly authorize MS, Microsoft Corporation and/or their designated agent to use this information solely to improve

their products or to provide customized services or technologies to you. MS or Microsoft Corporation may disclose this information to

others, but not in a form that personally identifies you.

Internet-Based Services Components.

The SOFTWARE may contain components that enable and facilitate the use of certain Internet-

based services. You acknowledge and agree that MS, Microsoft Corporation or their affiliates may automatically check the version of

the SOFTWARE and/or its components that you are utilizing and may provide upgrades or supplements to the SOFTWARE that may be

automatically downloaded to your Device.

Links to Third Party Sites.

The SOFTWARE may provide you with the ability to link to third party sites through the use of the

SOFTWARE. The third party sites are not under the control of MS, Microsoft Corporation or their affiliates. Neither MS nor Microsoft

Corporation nor their affiliates are responsible for (i) the contents of any third party sites, any links contained in third party sites, or any

changes or updates to third party sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the

SOFTWARE provides links to third party sites, those links are provided to you only as a convenience, and the inclusion of any link does

not imply an endorsement of the third party site by MS, Microsoft Corporation or their affiliates.

Additional Software/Services.

The SOFTWARE may permit YOKOGAWA METERS & INSTRUMENTS CORPORATION, MS,

Microsoft Corporation or their affiliates to provide or make available to you SOFTWARE updates, supplements, add-on components, or

Internet-based services components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE (“Supplemental

Components”).

If YOKOGAWA METERS & INSTRUMENTS CORPORATION provides or makes available to you Supplemental Components and no

other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.

If MS, Microsoft Corporation or their affiliates make available Supplemental Components, and no other EULA terms are provided,

then the terms of this EULA shall apply, except that the MS, Microsoft Corporation or affiliate entity providing the Supplemental

Component(s) shall be the licensor of the Supplemental Component(s).

YOKOGAWA METERS & INSTRUMENTS CORPORATION, MS, Microsoft Corporation and their affiliates reserve the right to

discontinue any Internet-based services provided to you or made available to you through the use of the SOFTWARE.

This EULA does not grant you any rights to use the Windows Media Format Software Development Kit (“WMFSDK”) components

contained in the SOFTWARE to develop a software application that uses Windows Media technology. If you wish to use the WMFSDK

to develop such an application, visit http://msdn.microsoft.com/workshop/imedia/windowsmedia/sdk/wmsdk.asp, accept a separate

license for the WMFSDK, download the appropriate WMFSDK, and install it on your system.

Appendix 6 END USER LICENSE AGREEMENT

Summary of Contents for AQ6373







































































































































































































































































































































































Search results

Summary of Contents for AQ6373

Reviews:

YOKOGAWA AQ6373, User Manual, Page: 355 / 358

Search results

Summary of Contents for AQ6373

Reviews: