YOKOGAWA AQ6373 User Manual Download Page 143

Page: 143 / 358

6-29

IM AQ6373-01EN

aveform Display

App

Index

Setting the unit for the Marker Value

Press

MARKER

Press the

MORE

soft key twice. The

MORE 3/3

key menu is displayed.

Press the

MARKER UNIT nm THz

soft key. Each time you press the soft key, the

instruments toggle between nm and THz.

Note

The display unit for the marker value (wavelength or frequency) can be set independently of

the waveform display’s horizontal axis units (wavelength or frequency) that were specified
using the HORIZON SCALE nm/THz soft key.

Printing Out Marker Values

Press

MARKER

Press the

MORE

soft key twice. The MORE 3/3 key menu is displayed.

Press the

MARKER LIST PRINT

soft key. The marker value is printed out from

the internal printer.

To cancel a print job which is in progress, press the

COPY CANCEL

soft key,

which appears after this key is pressed.

6.8 Marker Display

Summary of Contents for AQ6373







































































































































































































































































































































































Search results

Summary of Contents for AQ6373

Reviews:

YOKOGAWA AQ6373, User Manual, Page: 143 / 358

Search results

Summary of Contents for AQ6373

Reviews: