YOKOGAWA AQ6373 User Manual Download Page 301

Page: 301 / 358

10-14

IM AQ6373-01EN

No. Message

Cause of Warning

346 Option is not connected

No external device is connected.

347 GPIB2 not system controller

System controller connected to the GP-IB2 port has been set to an

external computer.

360 Storage full

No file can be created due to insufficient free space on the USB

storage medium.

361 USB Storage not inserted

USB storage medium not inserted.

362 USB Storage is write protected

The USB storage device is write protected.

363 USB Storage not initialized

USB storage not initialized. Or, it has been formatted in a format not

supported by this instrument.

364 Directory full

Directory is full, therefore no file can be created.

365 File not found

The specified file cannot be read because it has not been found. Or,

the file does not exist on the disk.

366 File is write protected

The file is specified to be read only, so that it cannot be rewritten or

deleted.
367 No data

No data to store.

368 File is not a trace file

A file cannot be read because it is not a trace file.

369 Illegal file name

A file cannot be saved due to an incorrect file name.

380 Undefined program

An attempt was made to run a program that is not defined.

381 Syntax error

Command incorrect (a program has been rewritten for some

reason).

10.10 Warning Display Function

Summary of Contents for AQ6373







































































































































































































































































































































































Search results

Summary of Contents for AQ6373

Reviews:

YOKOGAWA AQ6373, User Manual, Page: 301 / 358

Search results

Summary of Contents for AQ6373

Reviews: