manualshive.com logo in svg

YOKOGAWA AQ6373, User Manual, Page: 245 / 358

Share
Download
YOKOGAWA AQ6373 User Manual Download Page 245

8-41

IM AQ6373-01EN

Saving/Loading Data

1

2

3

4

5

6

7

8

9

10

11

App

Index

8.7  Saving/Loading Program Data

Procedure

Programs created with the program function are saved in binary format. 

 

CAUTION

Do not remove the USB storage medium or turn the power OFF while the USB 
storage medium access indicator is blinking. This can damage the data on the 
medium or the device itself. Also, always place a USB storage medium in the 
removable state (following the procedure in section 8.1) before removing it. 

Setting the Type of the File to Be Saved to PROGRAM

1.

  Press 

FILE

. 

2.

  Press the 

ITEM SELECT

 soft key. The soft key menu switches. 

3.

  Press the 

PROGRAM

 soft key. PROGRAM is selected, and the screen returns to 

the previous stage.

4.

  Press the 

WRITE

 soft key to display the program list and file list.

Program list

File list

Summary of Contents for AQ6373







































































































































































































































































































































































Reviews:

No comments