manualshive.com logo in svg

YOKOGAWA AQ6373, User Manual, Page: 289 / 358

Share
Download
YOKOGAWA AQ6373 User Manual Download Page 289

10-2

IM AQ6373-01EN

10.1  Upgrading the Firmware

8.

  Press the 

YES (REBOOT)

 soft key.

 

Step 1 of the version upgrade begins. When step 1 of the upgrade is finished, the 
instrument restarts automatically. 

 

When the instrument restarts, step 2 of the upgrade begins at the same time. 
When step 2 of the upgrade is finished, the power turns OFF automatically. 

 

This concludes the version upgrade.

 

If you press the NO soft key, the upgrade is cancelled and the instrument returns 
to the previous screen. 

Note

The instrument can not up upgraded when connected to a network. 
If connected to a network, the message, “Please disconnect LAN CABLE from LAN cable and 
remove USB storage device” appears and the YES soft key is disabled.   If you remove the 
cable from the Ethernet connector, the message, “Please remove USB storage device” appears 
and the YES soft key is enabled. 

Displaying the Patch List

4.

  Continuing on from step 3, press the 

PATCH LIST

 soft key. 

A list of patches installed up to the present is displayed. 

Explanation

When the version is upgraded, settings entered prior to the upgrade are initialized. If 
necessary, save your settings.

Summary of Contents for AQ6373







































































































































































































































































































































































Reviews:

No comments