6.6 Writing Linear Servomotor Parameters
6-19
6
Basic Functions That Requir
e Setting befor
e Operation
9.
Click the
Yes
Button.
Click the
No
Button to cancel writing the motor parameters to the linear encoder.
If you click the
Yes
Button, writing the motor parameter scale will start.
10.
Click the
Complete
Button.
11.
Click the
OK
Button.
12.
Turn the power supply to the SERVOPACK OFF and ON again.
This concludes the procedure to write the motor parameters.
Confirming If the Motor Parameters Have Been Written
After you write the motor parameters, you can use a monitor function to confirm that the motor
parameters are in the encoder.
If the motor parameters have not been written, no information on the Servomotor will be dis-
played.
