Yamato SM520 Instruction Manual Download Page 82

Page: 82 / 111

4. Operation Method

Shortcut function (schedule)

5.1 Scheduled time setting interface

Press Time area, the background color becomes
yellow

5.1.1 Scheduled time setting interface

Press Time area, the background color becomes
blue, and pop up the setting keypad.
If no need to modify, press × key at right keypad to
close the keypad.

5.1.2 Set the operation start time

①

If type into wrong number, press CLR key to clear

it;

②

Directly type into required numbers, 24h by

default.

5.1.3 Set the operation start time

①

If no need to schedule time, press × key at right

keypad to close the keypad.

5.1.4 Set the operation start time

①

Press green

√to confirm scheduled time, the

keypad will auto hide.

②

Return to scheduled time mode interface, the

equipment will operate sterilize & dry program when
it reaches the scheduled time 18:30.

Summary of Contents for SM520
















































































































Search results

Summary of Contents for SM520

Reviews:

Yamato SM520, Instruction Manual, Page: 82 / 111

Search results

Summary of Contents for SM520

Reviews: