Yamato SM520 Instruction Manual Download Page 62

Page: 62 / 111

4. Operation Method

Operation course (instrument dry)

6. Instrument dry program

Dry temp. 150

℃

, dry time 1h30min

Current temp. in chamber 28

℃。

Normal pressure (green character and icon)
Normal bottle (green character and icon)
Normal cover locking (green character and
icon)

Press the green START key to start operation!
Mode, temp. and time parameters cannot be
changed in operation!

7. Stop the operation of instrument dry
program

Interface display setting: dry temp.150

℃

, dry

time 1h30min. Current temp. in chamber 28

℃

Running time 0h0min. During heating, running
stage curve indicates yellow.
The green START key becomes red STOP key.

7.1 Stop the operation of instrument dry
program

During heating, press STOP key.

7.1.1 Stop the operation of instrument dry
program

Prompt box displays whether stop: press

√ to

confirm stop, and press × to continue operation if
misoperation.

7.1.2 Stop the operation of instrument dry
program

Press

√ to confirm to stop operation.

Summary of Contents for SM520
















































































































Search results

Summary of Contents for SM520

Reviews:

Yamato SM520, Instruction Manual, Page: 62 / 111

Search results

Summary of Contents for SM520

Reviews: