Yamato SM520 Instruction Manual Download Page 72 | Manualshive

Page: 72 / 111

Yamato SM520 Instruction Manual Download Page 72

69

4. Operation Method

Shortcut function (preheating)

Follow the procedures below for the setting of preheating:

1. Turn on the earth leakage breaker (switch ON).

Turn on the earth leakage breaker, touch screen
displays the left interface for 3 secs, and then switch
over to the next interface.

2. The touch screen displays the operation mode
and program executed last time.

Sterilize & dry program: sterilize temp.126

℃

, sterilize

time 30min;

Dry temp. 150

℃

, dry time 30min

Current temp. in chamber 32

℃

Normal pressure (green character and icon)
Normal bottle (green character and icon)
Normal cover locking (green character and icon)

2.1 The touch screen displays the operation mode
and program executed last time.

According

to

the

aforementioned

operation

procedures  of  instruction  manual,  set  the  required
operation mode program, ie. corresponding temp. and
time;  pressure,  water  tank  and  cover  are  normal
(green display). By default operate the program!
Press  Preheating  area,  the  background  color
becomes yellow, switch over the interface

3. Preheating operation interface

Preheat OFF background color is blue that means the
operation mode executed last time.

3.1 Preheating operation interface

Press ON, the background color becomes yellow,
switch over the interface

«
...
70
71
72
73
74
...
»

Summary of Contents for SM520
















































































































Reviews:

No comments