Yamato SM520 Instruction Manual Download Page 12 | Manualshive

Page: 12 / 111

Yamato SM520 Instruction Manual Download Page 12

9

2. Before Using

Installation precautions

9. Always ground this unit



The D class earth connecting works is required if no ground terminal is provided. In this

case, consult with the selling office where you purchased or our sales office.



Securely connect the power plug to the switchboard or outlet.

SM530/830

G

G

An earth connecting outlet is recommended to be
used.

SM520/820

These models do not include the power plug.
Correctly connect the ground to fit with the power
supply facility to be connected.

Do not connect the earth wire to gas or water pipes. If not, fire disaster may be caused.

10.

Connect the power cord paying attention to the color of each core wire

When  connecting  the  power  cord,  do  check  the
breaker on the electric power equipment be "OFF".

Note: SM520 and SM820 do not equip with the power
plug.  Select  and  connect  the  appropriate  plug  or
terminal  corresponding  to  the  power  capacity  that  is
adjusted to the status of the power supply equipment
side.

Core Wire Color

Interior Wiring

Brown

Positive voltage

Blue

Negative voltage

Yellow green

Ground Wire Side

Power plug

Earth connecting outlet

緑（アース端子へ）

M5用丸端子

黒（定格電源端子へ）

白（定格電源端子へ）

Rounded terminal

for M4

Green (to ground)

Black (to power supply)

White (to power supply)

«
...
10
11
12
13
14
...
»

Summary of Contents for SM520
















































































































Reviews:

No comments