Yamato SM520 Instruction Manual Download Page 79

Page: 79 / 111

4. Operation Method

Shortcut function (schedule)

Follow the procedures below for the setting of scheduled operation:

1. Turn on the earth leakage breaker (switch ON).

Turn on the earth leakage breaker, touch screen
displays the left interface for 3 secs, and then switch
over to the next interface.

2. The touch screen displays the operation mode
and program executed last time.

Instrument sterilize program: sterilize temp. 126

℃

sterilize time 30min
Dry temp.150

℃

, dry time 1h30min

Current temp. in chamber 32

℃

Normal pressure (green character and icon)
Normal bottle (green character and icon)
Normal cover locking (green character and icon)

2.1 The touch screen displays the operation mode
and program executed last time.

Press Schedule area, the background color becomes
yellow, switch over the interface.

3. Schedule operation interface

Date+time mode area is gray, which is the last

scheduled mode, and the scheduled date and time
are shown at right.

3.1 Scheduled mode selection interface

Press Date, the background color becomes yellow,
switch over the interface

Summary of Contents for SM520
















































































































Search results

Summary of Contents for SM520

Reviews:

Yamato SM520, Instruction Manual, Page: 79 / 111

Search results

Summary of Contents for SM520

Reviews: