Yamato SM520 Instruction Manual Download Page 28

Page: 28 / 111

4. Operation Method

Operation course (liquefy & retain temp.)

Follow the procedures below for the setting of liquefy & retain temp.:

1. Turn on the earth leakage breaker (switch ON).

Turn on the earth leakage breaker, touch screen
displays the left interface for 3 secs, and then switch
over to the next interface.

2. The touch screen displays the operation mode
and program executed last time.

Sterilize & dry program: sterilize temp.121

℃

, sterilize

time 10min. Dry temp.150

℃

, dry time 1h30min.

Current temp. in chamber 58.5

℃，

Normal pressure (green character and icon)
Normal bottle (green character and icon)
Normal cover locking (green character and icon)

2.1 The touch screen displays the operation mode
and program executed last time.

Press Operation mode area, the background color
becomes yellow, switch over the interface

3. Mode selection interface

Sterilize & dry prog background color is blue that

means it is the operation mode executed last time.

3.1 Mode selection interface

Press Liquefy & retain prog, the background color
becomes yellow, switch over the interface

Summary of Contents for SM520
















































































































Search results

Summary of Contents for SM520

Reviews:

Yamato SM520, Instruction Manual, Page: 28 / 111

Search results

Summary of Contents for SM520

Reviews: