Yamato SM520 Instruction Manual Download Page 52

Page: 52 / 111

4. Operation Method

Operation course (fluid sterilize)

Follow the procedures below for the setting of fluid sterilize:

1. Turn on the earth leakage breaker (switch ON).

Turn on the earth leakage breaker, touch screen
displays the left interface for 3 secs, and then switch
over to the next interface.

2. The touch screen displays the operation mode
and program executed last time.

Instrument sterilize program: sterilize temp.126

℃

sterilize time 30min

Current temp. in chamber 26

℃，

Normal pressure (green character and icon)
Normal bottle (green character and icon)
Normal cover locking (green character and icon)

2.1 The touch screen displays the operation mode
and program executed last time.

Press Operation mode area, the background color
becomes yellow, switch over the interface

3. Mode selection interface

Instrument sterilize prog background color is blue that

means it is the operation mode executed last time.

3.1 Mode selection interface

Press Fluid sterilize prog one time,

the background

color becomes yellow, switch over the interface.

Summary of Contents for SM520
















































































































Search results

Summary of Contents for SM520

Reviews:

Yamato SM520, Instruction Manual, Page: 52 / 111

Search results

Summary of Contents for SM520

Reviews: