Yamato SM520 Instruction Manual Download Page 64

Page: 64 / 111

4. Operation Method

Operation course (sterilize & dry)

Follow the procedures below for the setting of sterilize & dry:

1. Turn on the earth leakage breaker (switch ON).

Turn on the earth leakage breaker, touch screen
displays the left interface for 3 secs, and then switch
over to the next interface.

2. The touch screen displays the operation mode
and program executed last time.

Instrument dry program: dry temp.126

℃

, dry time

30min

Current temp. in chamber 26

℃

Normal pressure (green character and icon)
Normal bottle (green character and icon)
Normal cover locking (green character and icon)

By default this mode and parameters can
directly operate by pressing the START key!

2.1 The touch screen displays the operation mode
and program executed last time.

Press Operation mode area, the background color
becomes yellow, switch over the interface

3. Mode selection interface

Instrument dry prog background color is blue that

means it is the operation mode executed last time.

3.1 Mode selection interface

Press Sterilize & dry prog, the background color
becomes yellow, switch over the interface

Summary of Contents for SM520
















































































































Search results

Summary of Contents for SM520

Reviews:

Yamato SM520, Instruction Manual, Page: 64 / 111

Search results

Summary of Contents for SM520

Reviews: