Yamaha DME24N Owner'S Manual Download Page 93

Page: 93 / 482

Chapter 3

Main Panel Window

DME Designer Owner’s Manual

[Cancel] Button

Closes the window without changing any settings.

■

[Event Exceptions]

Specifies “exception” year/month/day and time settings at which events will not be executed.

The available settings will depend on the event cycle.

• When the event cycle is [Year]

Only the [Year] setting is available.

• When the event cycle is [Month]

Only the [Month] and [Week] setting is available.

• When the event cycle is [Week]

Only the [Month], [Week] and [Day] settings are available.

• When the event cycle is [Day]

Only the [Month], [Week], [Day], and [Day of the week] settings are available.

• When the event cycle is [Hour]

Only the [Month], [Week], [Day], [Day of the week], and [Hour] settings are available.

Summary of Contents for DME24N



































































































































































































































































































































































































































































































Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands

Yamaha DME24N, Owner'S Manual

Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands