Yamaha DME24N Owner'S Manual Download Page 336

Page: 336 / 482

Chapter 5

Components

DME Designer Owner’s Manual

336

■

Recording Parameter Sets

Recording parameters from the current window

The parameters present when the snap button is switched are recorded to the snap button before
the switch.

Click the snap button ([A] through [D]) that will record the parameter set. This turns it
ON.

Set the parameters in the editor to the settings you want to record.

Click another snap button.

Recalling a Library

Click the snap button that has recorded the parameter set. This turns it ON.

The library is recalled.

■

Switching Parameter Set

If you click a snap button that has a parameter set recorded, the system switches to the parameter
set recorded there.

■

Copying Parameter Sets

Parameter sets can be copied between snap buttons [A]~[D].

• Select from the contextual menu.

• Drag and drop.

Drag-and-drop copy will also work between components of the same type.

Summary of Contents for DME24N



































































































































































































































































































































































































































































































Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands

Yamaha DME24N, Owner'S Manual

Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands