Yamaha DME24N Owner'S Manual Download Page 203

Page: 203 / 482

Chapter 4

Designer

DME Designer Owner’s Manual

203

[Port Label Color] Button

Species the color of the I/O port label characters. The “Select Color” window will appear when this
button is clicked.

[Color] Button

Specifies the color of the object. The “Select Color” window will appear when this button is clicked.

Port Style on Zone Window

Species how ports will be displayed on SP2060 objects in the zone window.

[Audio Port (Classic Style)]

Displays all audio ports. This command grayed out and cannot be selected for SP2060 objects.

[Custom Port Style]

Customizes the port display. This setting is always used for SP2060 objects.

• [Left]

Specifies the number of ports to be displayed on the left side of the object.

• [Right]

Specifies the number of ports to be displayed on the right side of the object.

• [Edit Port Label and Type]

Edits the label and type for each port.
The “Edit Port Label and Type” window opens when clicked.

→

“Edit Port Label and Type” window (

page 197

[OK] Button

Applies the setting changes and closes the window.

[Cancel] Button

Closes the window without changing any settings.

Summary of Contents for DME24N



































































































































































































































































































































































































































































































Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands

Yamaha DME24N, Owner'S Manual

Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands