Yamaha DME24N Owner'S Manual Download Page 10

Page: 10 / 482

Getting Started

DME Designer Owner’s Manual

Main Changes from V1.0 to V1.1

■

Main Panel Window

• Instead of the former Parameter Link function, there are now two functions: a Global Link function

that links parameters within all DMEs in a zone and a Local Link function that links parameters
within a single DME unit. (

page 81

)

• The Synchronization function can now not only send data from DME Designer to the DME unit,

but can also synchronize by reading data from the DME unit. (

page 83

)

• Scene Increment/Decrement and Time Adjustment can now be assigned in the GPI input

function. (

page 98

)

• DME unit events can now be recorded by the Event Logger function and displayed in the Event

Logger window. (

page 154

)

• The time for executing an event can now be set by using the Event Scheduler function.

(

page 125

)

• Parameters in the current configuration can now be listed on the display and printed out by using

the Parameter List function. (

page 126

)

• The Wav File Manager can manage Wave files played by the Wav File Player. (

page 130

)

• Settings can be made by the DAW Control function that are used for controlling DMEs from a

DAW controller. (

page 137

)

• DME unit data can now be saved as a backup file by using the Backup function. (

page 137

)

■

Designer Window

• The port name display can now be switched between long name display and short name display.

(

page 179

)

• DME64N cascade connections can now be set. (

page 195

)

• Priority items can now be set when compiling configurations by using the [Compile Priority]

function in the “Preferences” dialog box. (

page 195

)

• Delay time can now be displayed for each component by using the Show Signal Delay function.

(

page 281

)

• Monitoring points can now be edited by using the “Monitoring Point List” dialog box.

(

page 282

)

• The status of connections in a configuration can now be analyzed in advance by using the

Analyze function, without connecting the DME unit. (

page 284

)

• You can now set the action that occurs when you double-click a user module object. You can also

turn user module security ON or OFF, and set a password. (

page 286

)

• Libraries with component parameters saved in them can now be recalled from the context menu

for a component object. (

page 339

)

• A new rule for wiring prohibits connections to terminals that would short the terminator.

■

Component Editor/Component

• A status bar has been added to the component editor. It displays the component name,

component ID, and parameter IDs for parameters that are being edited. (

page 295

)

• A Snap function has been added that records parameters in the editor temporarily. Parameter

sets can then be switched by using the Snap buttons. (

page 335

)

• The meter's peak hold function can now be turned ON or OFF. (

page 332

)

• A Wav File Player component has been added for playing Wave files. (

page 398

)

• An effect component called SPX has been added that supports many different effect

applications, such as reverb, delay, and modulation effects, along with complex combinations of
multiple effects. (

page 435

)

• A Slot Out component editor has been added. (

page 447

)

Summary of Contents for DME24N



































































































































































































































































































































































































































































































Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands

Yamaha DME24N, Owner'S Manual

Search results

Summary of Contents for DME24N

Reviews:

Related manuals for DME24N

Brands by name

Popular brands