Chapter 6
Component Guide
DME Designer Owner’s Manual
405
■
All Inputs to One Output
When you click the output channel number on the matrix, the [Delay Matrix - All Inputs to One
Output] editor window opens. All input channels and one output channel are displayed. The output
channel is the one you have clicked on in the delay mixer component editor.
Output Channel Switching
The [Delay Matrix - All Inputs to One Output] editor window displays the output channel clicked on
in the delay matrix component editor. The [Channel] buttons in the [Output] section of the [Delay
Matrix - All Inputs to One Output] editor window switch the channel group that is displayed in the
window.
If you make the delay matrix component editor active while the [Delay Matrix - All Inputs to One
Output] editor window is displayed, and then click another output channel, that channel group will
be displayed in the [Delay Matrix - All Inputs to One Output] editor window.
One [Delay Matrix - All Inputs to One Output] editor window is displayed for each delay matrix
component editor.
Section
Parameter
Setting Range
Function
1
Bus Send Level Delay
0 to 500ms
Sets the delay time for each input channel.
2
Level
-
∞
to +10 dB
Sets the output signal level for each input channel.
3
On
ON/OFF
Turns ON the output for each input channel.
4
Output
Channel
--
Displays the selected output channel. Select
another channel from a menu.
5
On
ON/OFF
Turns ON the output for the channel displayed in
the window.
6
Meter
--
Displays the output signal level of the channel
displayed in the window.
7
Block
On
--
Turns ON all channel inputs. When turned ON, the
[On] button lights up.
8
Off
--
Turns OFF all channel inputs.
9
Nominal
--
Resets all of input signal levels, making them 0 dB.
)
Minimum
--
Resets all of input signal levels, making them -
∞
dB.
1
2
3
4
5
6
7
8
)
9
