Installation and User Manual
ADPRO FastTx by Xtralis
62
Doc 11949_06
Figure 65: Serial Communication Port Settings Menu
Modem/TA Model
Options:
Model List, Direct Connect
Select the model of the modem or terminal adapter (TA) connected to the particular COMMS
port. Refer to the device’s user manual to assist with setting the correct configuration.
Use the Direct Connect option when the ADPRO FastTx is connected directly to a PC running
the ADPRO VideoCentral software. In this case, no modem or TA is required and a special (‘null-
modem’) cable is needed for correct operation.
Line Type
Options:
Dial, Leased Line
Factory Default:
Dial
The
Dial
option is used for analog (PSTN) or digital (ISDN) networks where the connection is
usually made by dialling a particular telephone number. These lines may be routed via a
switchboard or PABX system.
Set this option to
Leased Line
if the system is connected via a dedicated (leased) line. Leased
lines are not normally routed through telephone switchboards or PABX equipment and no dialling
is required for the connection to be made.