Installation and User Manual
ADPRO FastTx by Xtralis
96
Doc 11949_06
Figure 96: Event Input Settings
•
The Type and Source selections are greyed out, enabling the operator to only change the
PTZ Preset Settings.
•
Enter the appropriate settings and click
OK
.
Event Response
Once an Event has been declared, the
Event Response
settings are used to define the actions
that will be taken in response to the Event.
Figure 97: Event Response Tab
Activate Control Output
When checked, the control output correlating to the camera channel number currently being
programmed will be activated for a period as defined in the
Alarm Input
/
Hold Time
(refer to
Alarm Input Settings
on page 81) upon full activation of an event. Refer to
Control Outputs
on
page 85.
Note:
If the assigned Control Output number has been specified for
Manual Operation
,
then an error message will be displayed.
