Installation and User Manual
ADPRO FastTx by Xtralis
74
Doc 11949_06
Figure 73: Camera Settings - PTZ
The PTZ Preset on Alarm feature allows the user to associate an alarm input, activity detection
on another connected camera or an ATM/EPOS transaction, to a preset camera position, so that,
in the event of an alarm, ADPRO FastTx will send the PTZ camera to a pre-programmed preset
position automatically.
The following parameters must be defined to use the PTZ preset on alarm feature:
•
QUAD images interval (delay between images)
•
Alarm Preset Interrupt
•
Time delay between Alarm Presets
•
Enable Auto-Home
•
Auto-Home expiry time
Time delay between QUAD images is described in the section above - refer to “
QUAD Images
Interval
” on page 73.
Alarm Preset Interrupt
Options:
Interruptible, Non-Interruptible
Default:
Interruptible
This option determines whether a PTZ camera that is currently going to a preset because of an
alarm activation, can be directed to another preset when another alarm activation occurs (or be
manually moved by an operator at the CMS).
If set to Interruptible, when a camera is in the process of going to a preset (say preset 4), and
then another alarm occurs with an associated preset (say preset 5), the camera will terminate the
movement to preset 4 and go to preset 5. If the setting was Non-Interruptible, then the camera
would complete the movement and image acquisition at preset 4, and then go to preset 5.
If the Non-Interruptible option is selected, the following dialog box is displayed to warn the user of
the potential to cause events to be queued and add delays in capturing event images.
