ADPRO FastTx by Xtralis
Installation and User Manual
Doc 11949_06
101
Figure 102: Selectable Multi-Screen Settings
As a result of this:
•
The selected camera will be removed from the Cameras listbox
•
The selected camera will be added to the Profile Layout.
If there are vacant spaces in the Layout, the camera will be placed in the first available space.
Otherwise, the Layout Split Size will be changed to the next higher Split Size.
The order of cameras will be preserved.
Remove a Camera from the Profile Layout Control
•
Highlight the camera entry in the Profile Layout control.
•
Click on the
[<]
button to remove the selected camera from the layout.
As a result of this:
•
The selected camera will be added to the Cameras listbox. The Cameras listbox will
maintain numerical order of cameras.
•
The selected camera will be removed from the Profile Layout control.
Layout control will shift the remaining cameras to fill the vacant place. If necessary, the Layout
Split Size will be changed to the next lower Split Size. The ordering of cameras will be preserved.
Modifying a Profile Layout
The placement of cameras within the layout can be altered at any time using Drag and Drop
operations.
This reshuffle will always involve two cameras swapping their placements, as Layout control will
not allow a camera and a vacant place to swap locations.
