ADPRO FastTx by Xtralis
Installation and User Manual
Doc 11949_06
103
Figure 104: Entry Path and Delay Settings
Entry Path Zone(s) create a controlled route to a location where the Fast Trace can be disarmed.
To create an Entry Path, a list of Entry Path Zones must be specified. Up to ten zones can be
designated on the entry path.
Highlight the Alarm Input number or camera to be assigned to the Entry Path Zone in the left
pane, and then use the arrows to add or remove the zones in the Path pane on the right.
The Entry Delay is the maximum time allowed (in seconds) from triggering the Entry Path to
disarming the system before an alarm is generated.
Options:
0 - 300 seconds, where 0 disables the Entry Delay
Factory Default:
30
seconds
Specifying an Alarm Input on the Entry Path means that an alarm on this zone will start the Entry
Path Delay timer.
Important: An Entry Path must be specified to activate the Entry Delay timer.
