Xtralis ADPRO FastTx Installation And User Manual Download Page 91 | Manualshive

Page: 91 / 138

background image

ADPRO FastTx by Xtralis

Installation and User Manual

Doc 11949_06

79

A Transaction Device (for example an ATM or EPOS terminal) can be connected to the ADPRO
FastTx via one of the GP Serial ports or Ethernet port. Up to sixteen transaction devices can be
configured.

Note:

Please contact your nearest Xtralis office for details of supported equipment.

For information on how to set up a transaction device, please refer to the Transaction Device
Software Programmers Manual (document number 11620_01) available on the website -

www.xtralis.com/adpro

.

4.3.12 Transparent Data Port

ADPRO FastTx supports transparent RS232 data transmission to/from ADPRO VideoCentral.
The port labelled DATA on the rear of the unit is the port used for this connection. This
functionality provides the capability to transfer an RS232 data stream from the ADPRO FastTx
unit to ADPRO VideoCentral, and vice-versa. This type of capability may be useful to support a
camera station that is not listed in the supported list for ADPRO FastTx, or controlling some other
industrial equipment at the remote site.

If a ADPRO VideoCentral user connects to a ADPRO FastTx with transparent data enabled, the
serial port is reserved exclusively for use by that user. Until that user disconnects, no other user
can access transparent data.

Figure 78: Transparent Data Port Menu

To enable the Transparent Data Port check the

Transparent Data Port Connected

option.

Note:

ADPRO VideoCentral also requires configuration changes for this functionality
(

Database

/

Administration

/

Configure Transparent Data Port

).

The Connection Port drop down list displays the Data Port that is currently allocated in the
ADPRO FastTx system. Select the

Configure …

button and the following dialog is displayed.

«
...
89
90
91
92
93
...
»

Summary of Contents for ADPRO FastTx











































































































































Reviews:

No comments

Related manuals for ADPRO FastTx

AquaTrans AT868

Brand: GE Pages: 67

Mini-LCD Transmitter TX-MLCD

Brand: AMX Pages: 22

Brand: Yaesu Pages: 20

Brand: Kimo Pages: 32

Brand: Yaesu Pages: 36

Brand: H-ITT Pages: 2

velatia transforma.organic

Brand: Ormazabal Pages: 16

Brand: Clas Ohlson Pages: 4

Brand: Spektrum Pages: 14

Gemco Brik 955QD Series

Brand: Ametek Pages: 24

Brand: Solectek Pages: 63

Brand: Comcast Pages: 23

Brand: Icom Pages: 32

Brand: Icom Pages: 80

Brand: Icom Pages: 81

Brand: HYDAC ELECTRONIC Pages: 8

Brand: Park Air Systems Pages: 118

Brand: Pepperl+Fuchs Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands