Installation and User Manual
ADPRO FastTx by Xtralis
78
Doc 11949_06
4.3.10 Monitor
A local monitor can be connected to the ADPRO FastTx and used to display a number of camera
views in a sequence.
Figure 77: Monitor Menu
Monitor Settings
Set the
Local Monitor Connected
checkbox if a sequence monitor is to be used. Click the
Configure
button to setup the sequence.
Sequence List
The list defines the sequence (order) in which camera images are presented on the monitor. The
sequence list can show up to 20 cameras and the checkbox next to the camera number will
select that camera for inclusion.
Dwell Time
Options:
Range 1 to 99
Factory Default:
2 seconds
Dwell Time
is used to control the duration (in seconds) that a camera in the Sequence List is
displayed on the monitor. The Sequence Time is common to all active channels and is defined as
the duration a channel (camera) is displayed before switching to the next active channel. It can
be set from 1 to 99 seconds.
4.3.11 Transaction Devices
The Transaction Interfacing option provides a mechanism to associate video data with EPOS/
ATM transactions. This enables users to view live transaction data synchronised to video.
Note:
A Transaction Device Software License must be purchased to enable transaction
device functionality. Licensing instructions are provided with the purchase of a
licence (refer to
Licensing
on page 57).
