Installation and User Manual
ADPRO FastTx by Xtralis
56
Doc 11949_06
4.3.4 Date/Time Settings
To enable accurate event tracking, the ADPRO FastTx can be set to accommodate local or
regional daylight saving time shifts when they affect the location where the ADPRO FastTx is
installed.
Figure 60: Date/Time Settings Menu
Time Zone
The
Time Zone
field is used to define the number of hours and minutes that the actual site
location is ahead (or behind) the UTC reference of 0 degrees of longitude (also known as
Greenwich Mean Time).
Daylight Saving
In regions where daylight saving is implemented over the summer months, users can enter the
local start and finish dates to ensure the ADPRO FastTx clock is automatically corrected. The
Daylight Savings Enable
check box is used to start this feature and allow entry of the start and
finish dates.
ADPRO FastTx implements daylight saving start and finish at 2 am local time (02H00) and will
advance or set back the time by 1 hour accordingly.
Caution:
When the ADPRO FastTx unit is shipped from the factory, Universal Time is
programmed in the unit and is used as the ‘current’ time. To match the ‘current’ time
to the local time at your location, change the time zone setting to the correct zone.
Changes to the value of the ‘current’ time (via ADPRO VideoCentral) should only be
used for minor adjustments when absolutely necessary.
This warning only applies to changes to the value for current time and does not
apply to Time Zone or Daylight Saving changes.
