Installation and User Manual
ADPRO FastTx by Xtralis
52
Doc 11949_06
Your IT manager should be able to provide the IP address settings. Once the basic connection
details have been configured and saved, the ADPRO FastTx is ready to connect via the
operational network.
4.3
Entering the ADPRO FastTx Setup Screen
Note:
Always use extreme caution when remotely programming Transmitter systems.
Changing connection parameters or passwords may result in the ADPRO
VideoCentral system not being able to regain access, resulting in the need for
engineering attendance at the site to reprogram the system.
Remote programming of ADPRO FastTx systems is carried out via a screen as shown below. To
start the programming operation, click on the
Installer Menu
button behind the
Site Actions
button in the main ADPRO VideoCentral User Interface GUI:
Figure 55: Installer Menu Icon
Note:
Only operators logged on to the system either as Administrators or Installers have
access to this icon. Users defined as Operators do not have access to this function.
If this icon does not appear or appears greyed out, log out the current operator and
log-on a new operator with the correct access rights.
The current settings within the ADPRO FastTx will be downloaded to the ADPRO VideoCentral
system and the following screen will appear:
