179
to the internal SMTP mail server. For this, please set up the corresponding user
accounts and mail addresses on your internal mail server.
To avoid mail loops, the internal mail server must recognise the
domain as a local domain. It must not attempt to send these
emails back to the Internet.
Activate SPAM filter
SPAM filtering configuration
A SPAM mail is an unsolicited email, usually with dubious origin. SX-GATE's SPAM
filter identifies these mails and makes them easily recognizable or even discards or
refuses to accept such mails.
Your selection here does not directly affect SX-GATE's
configuration, only which screens you will be shown next.
SPAM filtering configuration
-
configure common SPAM filter
Please read on at
(p. 179)
-
individual SPAM filtering per SX-GATE user mailbox
Please read on at
(p. 179)
-
skip SPAM filter configuration
Please read on at
(p. 182)
Individual SPAM filter
Individual SPAM filtering per SX-GATE user mailbox must be configured in the user
administration by clicking on each account separately.
Please read on at
Common SPAM filter
To activate the SPAM filter you have to enable at least one of the thresholds. Here you
activate the SPAM filter in relay mode. In this mode it examines every inbound email
while passing the SX-GATE mail server. It is not possible to assign different thresholds
to different users, as the mail users are not defined on SX-GATE but on the internal
mail server.
