120
Configure RDP servers
RDP options
Select the options passed to the terminal server client "mstsc.exe".
TS admin
This option is only considered when connecting with a terminal server. Use the
"/admin" option to administer the server. Without the option a normal terminal
server session is opened.
Public computer
The "/public" option makes sure that no settings are stored on the client computer.
Also the user login always has to be entered manually. Remove the "/public"
option only if you are sure that the RDP USB stick is solely used with a private
computer.
12.3.2-M
RAS settings
These settings are available for members of group "system-ras" only. The settings
apply to remote access using IPSec VPNs or ISDN dial-in.
Send WoL upon dial-in to Mac address
If you enter the hardware address of some computers network card here, SX-GATE
will send a Wake-on-LAN packet to it when the user logs in. The expected format
is "XX:XX:XX:XX:XX:XX". Each "X" must be a digit or a letter from "A" to "F". The
delimiters may be colons, dots, hyphens or underscores.
The WoL packet is sent on interface eth0.
Assigned IP address
All of SX-GATE's RAS services which require the client to authenticate will assign an
IP address to the client. You can select among two options. Either an interface specific
but user independent IP is assigned or a user will be assigned his own dedicated IP
address.
If you assign an unallocated LAN IP to the RAS client, SX-GATE
will setup a proxyarp entry for its address. No routing entries
will be necessary on the LAN machines in this case in order to
communicate with the RAS client.
