Xerox WorkCentre Pro 575, Advanced Features Manual

Page: 67 / 327

Programming the Machine
WorkCentre Pro 555/575 2-49
Send After Scan Default Setting
This feature enables you to determine whether the dialing starts while
the machine is scanning the documents or after the machine has
scanned all documents in the Memory Send mode.
Also, if the dialing after scanning is selected, you can select to delete
or send the scanned pages when the memory becomes full during
scanning.
To set the Send After Scan default mode:
1. Press:
2. To enable Send After Scan, press , then go to step 3.
To disable Send After Scan, press , then go to step 4.
3. Select the memory full option.
To delete the pages being scanned, press .
To send the pages being scanned, press .
4. The menu selection screen redisplays. Press
Exit or Stop to
return to the Standby Mode.
Menu
1.On
Send after scan
2.Off
2.Send scanned page
When memory full
1.Cancel sending