Xerox WorkCentre Pro 575 Advanced Features Manual Download Page 27

Page: 27 / 327

Programming the Machine

WorkCentre Pro 555/575

2-9

Entering Characters

Using the Numeric Keypad to enter characters:

Correcting Characters

Replacing Characters

Input correct characters over the existing characters.

Using the

and

arrow keys, position the

cursor at the character to

be corrected.

Enter the desired

character.

Note:

You may need to move the cursor to the left or right, then
reposition the cursor prior to entering or deleting a new
character.

Name (40 max)

[XERIX ]

Name (40 max)

[XEROX ]

Summary of Contents for WorkCentre Pro 575








































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands

Xerox WorkCentre Pro 575, Advanced Features Manual

Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands