Xerox WorkCentre Pro 575 Advanced Features Manual Download Page 135

Page: 135 / 327

Transmitting Documents

WorkCentre Pro 555/575

5-31

While viewing the job to resend, press

Enter or Start. (If the

original job was dialed using the keypad, the next screen will
allow the phone number to be changed).

Select the Change option:

To resend the job without changing the facsimile number, press

. The machine starts dialing the number.

To resend the job with a different facsimile number, press

Using the Numeric Keypad, enter the new facsimile number.

Press

Enter.

The designated job is resent, then the machine returns to the Standby
Mode.

2.Change

Job number: 016

1.Start

Enter fax number

[1234567890]

Summary of Contents for WorkCentre Pro 575








































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands

Xerox WorkCentre Pro 575, Advanced Features Manual

Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands