Xerox WorkCentre Pro 575 Advanced Features Manual Download Page 20

Page: 20 / 327

Programming the Machine

2-2

WorkCentre Pro 555/575

Keys used in Menu Mode Operation

The following table lists the keys commonly used when programming
the machine in Menu Mode.

Key

Key Description

Press the

Menu key to change the display from

Standby Mode to the menu screen. When the
menu screen is already displayed, press this key
to scroll up through the menu selections.

When a menu screen is displayed, press the
Down arrow key to scroll down through the menu
selections.

When the menu screen is displayed, press the

Left arrow key to display the preceding menu.
When entering characters, use this key to move
the cursor to the left.

When entering characters, use the

Right arrow

key to move the cursor to the right.

When the currently highlighted menu has
sub-items, press the

Enter key to display the

screen of sub-items.

Press the

Exit key to exit the menu mode.

Numeric Keypad

The Numeric Keypad is used to enter numeric,
alphabetical or special characters information.

Menu

Enter or

↵

Exit or *

Summary of Contents for WorkCentre Pro 575








































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands

Xerox WorkCentre Pro 575, Advanced Features Manual

Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands