Xerox WorkCentre Pro 575 Advanced Features Manual Download Page 113

Page: 113 / 327

Transmitting Documents

WorkCentre Pro 555/575

5-9

Priority Transmission

Use this procedure to send a document immediately, even when
other jobs are reserved in memory.

To Priority Send a document:

Load the document face down in the Document Support.

Select the desired

Resolution and Contrast.

Press:

Using one of the dialing methods, enter the remote fax number,
then press

Enter, if needed.

The document is transmitted immediately or immediately
following the operation in process.

Note:

Only one transmission can be Priority Reserved.

Note:

You can select another option for this job. Refer to the
selected option for the procedure.

Menu

Priority fax

Enter fax number

Summary of Contents for WorkCentre Pro 575








































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands

Xerox WorkCentre Pro 575, Advanced Features Manual

Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands