Xerox WorkCentre Pro 575 Advanced Features Manual Download Page 201

Page: 201 / 327

Reports

WorkCentre Pro 555/575

9-23

To print the Settings Report:

Press:

The Settings Report prints, then the machine returns to the Standby
Mode.

Note:

Total Pages represents the grand total for Scanned and
Printed pages, it is not the same as Drum count that is
found on the Activity Report.

Note:

The firmware identification number is located at the top of
the Settings Report. Refer to this number when calling for
service.

Menu

Summary of Contents for WorkCentre Pro 575








































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands

Xerox WorkCentre Pro 575, Advanced Features Manual

Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands