Xerox WorkCentre Pro 575 Advanced Features Manual Download Page 132

Page: 132 / 327

Transmitting Documents

5-28

WorkCentre Pro 555/575

Transmitting Using a Department Code

When the Department Code option is set, the “Enter Dept. code”
screen is displayed.

To set or change Department Codes, refer to Chapter 2, “Changing
Department Codes”.

To use the machine:

Enter the 5-digit Department Code, then press

Enter.

The standby mode screen displays.

If no activity is performed within 1 minute after entering the
Department Code, the display returns to the “Enter Dept. code”
screen.

Jan-31 02:23pm 100%

Enter Dept. code

Summary of Contents for WorkCentre Pro 575








































































































































































































































































































































Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands

Xerox WorkCentre Pro 575, Advanced Features Manual

Search results

Summary of Contents for WorkCentre Pro 575

Reviews:

Related manuals for WorkCentre Pro 575

Brands by name

Popular brands