Xerox WORKCENTER 5222 System Administration Manual Download Page 59

Page: 59 / 444

Billing Information

Billing Information

This tab allows you to view the billing meter information.
For more information, refer to the following:

Billing Information – page 59
User Account Billing Information – page 59

Press the <Machine Status>
button on the control panel.

Select the [Billing Information]
tab.

Select the required option.

Billing Information

This feature allows you to view the total number of prints made on the machine. You
can also view the machine’s serial number.

Select [Billing Information] on
the [Billing Information] screen.

Machine Serial Number

Displays the serial number of the machine.

Current Meter Reading

• Total Impressions - Displays the number of total copies and prints.

User Account Billing Information

This feature displays the billing information of the currently logged-in user.

NOTE:

This feature is available only when [Accounting] > [Accounting Type] is set to

[Local Accounting], and the corresponding [Auditron Mode] is enabled.

Select [User Account Billing
Information] on the [Billing
Information] screen.

Meter (Copy Jobs)

Displays the meter readings for copy jobs.

Meter (Scan Jobs)

Displays the meter readings for scan jobs.

Meter (Print Jobs)

Displays the meter reading for print jobs.

Summary of Contents for WORKCENTER 5222





























































































































































































































































































































































































































































Search results

Summary of Contents for WORKCENTER 5222

Reviews:

Related manuals for WORKCENTER 5222

Brands by name

Popular brands

Xerox WORKCENTER 5222, System Administration Manual

Search results

Summary of Contents for WORKCENTER 5222

Reviews:

Related manuals for WORKCENTER 5222

Brands by name

Popular brands