Xerox WORKCENTER 5222 System Administration Manual Download Page 32

Page: 32 / 444

3 Maintenance

Insert the cartridge as shown in
the illustration, and slide it into
the machine until it clicks.

Pull the cartridge tape straight
out without breaking it.

Push the cartridge again to
ensure it is positioned correctly.

Close Cover A until it latches,
and then close the bypass tray.

Close the front cover.

NOTE:

If the front cover is not

completely closed, a message will
appear and the machine will not
operate.

Summary of Contents for WORKCENTER 5222





























































































































































































































































































































































































































































Search results

Summary of Contents for WORKCENTER 5222

Reviews:

Related manuals for WORKCENTER 5222

Brands by name

Popular brands

Xerox WORKCENTER 5222, System Administration Manual

Search results

Summary of Contents for WORKCENTER 5222

Reviews:

Related manuals for WORKCENTER 5222

Brands by name

Popular brands