Xerox WORKCENTER 5222 System Administration Manual Download Page 17 | Manualshive

Page: 17 / 444

background image

17

2 Paper and Other Media

The machine is designed to use various paper types and other media. This chapter
provides information on loading paper and other types of media into the machine.

Loading Paper

The machine can be equipped with various paper trays. Depending on the machine
configuration, up to six paper trays are available including the Envelope Tray. This
section provides information on how to load paper into each type of tray.

NOTE:

Make sure the side and rear paper guides on the trays are properly positioned

to match the size of paper loaded. If there is a gap between the paper stack and the
guides, paper may not be fed into the machine properly, or paper jams may occur.

For information on the paper sizes and media types for each tray, refer to

Supported

Paper Sizes and Types on page 23

.

For information on the acceptable range of paper sizes and capacity for each tray, refer
to

Paper Supply in the Appendix chapter on page 423.

Preparing Paper for Loading

Before loading paper into the paper trays, fan the edges. This procedure separates any
sheets of paper that are stuck together and reduces the possibility of paper jams.

NOTE:

To avoid paper jams and misfeeds, do not remove paper from its packaging

until required.

Trays 1 & 2/Two Tray Module (Trays 3 & 4)

Trays 1 to 4 can be loaded with standard and non-standard sized paper.

NOTE:

If the machine is processing a job, do not open the active paper tray.

1.

Pull out the paper tray towards
you.

NOTE:

To avoid jams and misfeeds,

do not load paper on top of any
remaining paper in the tray. Remove
the paper, and reload it on top of the
new stock loaded.

2.

If required, move the paper tray
guides further out to load the
new stock.
To adjust the side and rear
guides, pinch the guide lever on
each guide and slide the guides
to their new position. To secure
the guides in position, release
the levers.

«
...
15
16
17
18
19
...
»

Summary of Contents for WORKCENTER 5222





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WORKCENTER 5222

Brand: LabelTac Pages: 2

Brand: OEC Pages: 28

Brand: Samsung Pages: 549

Brand: Canon Pages: 394

Brand: Xerox Pages: 128

Brand: Printek Pages: 34

DocuPrint 4050 NPS

Brand: Xerox Pages: 248

Brand: Xerox Pages: 109

Brand: Paradise POS Pages: 275

Brand: Source Technologies Pages: 47

Brand: SATO Pages: 2

Brand: Olivetti Pages: 56

Brand: DataMetrics Pages: 35

Brand: DataMetrics Pages: 37

Amersham Typhoon

Brand: GE Pages: 144

imageRUNNER C3120

Brand: Canon Pages: 20

imageRUNNER C3170 series

Brand: Canon Pages: 12

imageRUNNER C3170 series

Brand: Canon Pages: 45

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands