manualshive.com logo in svg

Xerox WORKCENTER 5222, System Administration Manual

The Xerox WORKCENTER 5222 Reference Manual is an essential tool for mastering your device's features and maximizing productivity. Easily download this comprehensive manual for free from manualshive.com, enabling you to conveniently access step-by-step instructions and troubleshooting tips to optimize your Xerox WORKCENTER 5222 experience.

Share
Download
background image

Fault Codes 

401

018-752

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 52 (unavailable) during 
the address book query. The server is unavailable. Wait a while, then repeat the 
same operation. Contact the network administrator if the problem persists.

018-753

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 53 (unwilling to 
perform) during the address book query. The server is unwilling to perform the 
operation. Wait a while, then repeat the same operation. Contact the network 
administrator if the problem persists.

018-754

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 54 (loop detect) during 
the address book query. A loop was detected (service-related problem). Check 
the LDAP server service operating status.

018-764

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 64 (naming violation) 
during the address book query. A naming violation occurred (update-related 
problem). Check the LDAP server status.

018-765

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 65 (object class 
violation) during the address book query. An object class violation occurred 
(update-related problem). Check the LDAP server status.

018-766

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 66 (not allowed on 
nonleaf) during the address book query. The operation is not allowed on a 
nonleaf object (update-related problem). Check the LDAP server status.

018-767

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 67 (not allowed on 
RDN) during the address book query. The operation is not allowed on an RDN 
(update-related problem). Check the LDAP server status.

018-768

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 68 (entry already 
exists) during the address book query. The entry already exists (update-related 
problem). Check the LDAP server status.

018-769

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 69 (object class mods 
prohibited) during the address book query. Object class modifications are 
prohibited (update-related problem). Check the LDAP server status.

018-770

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 70 (search result too 
large) during the address book query. Review the search conditions and search 
root entry, then repeat the same operation. Contact the network administrator if 
the problem persists.

018-771

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 71 (affects multiple 
DSAs) during the address book query. Check the LDAP server status.

018-780

An LDAP server protocol error occurred in the address book operation. The 
server returned the RFC2251 specification protocol error 80 (unknown error) 
during the address book query. Check the LDAP server status.

Code

Description and Remedy

Summary of Contents for WORKCENTER 5222





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WORKCENTER 5222

LabelTac 4 Quick Start Manual preview
4
Brand: LabelTac Pages: 2
DataCard CP60 Quick Install Manual preview
CP60
Brand: DataCard Pages: 8
Samsung MFP SCX-6345N Manual Del Usuario preview
MFP SCX-6345N
Brand: Samsung Pages: 165
Samsung Inkjet SF-430 Quick Install Manual preview
Inkjet SF-430
Brand: Samsung Pages: 2
Samsung Inkjet SCX-1150F Repair Manual preview
Inkjet SCX-1150F
Brand: Samsung Pages: 66
Samsung CLX-6220FX User Manual preview
CLX-6220FX
Brand: Samsung Pages: 155
Samsung CLX-3170FN series User Manual preview
CLX-3170FN series
Brand: Samsung Pages: 220
Samsung CLX 6210FX - Color Laser - All-in-One License Agreement preview
CLX 6210FX - Color Laser - All-in-One
Brand: Samsung Pages: 36
Samsung CLX-3160 Series User Manual preview
CLX-3160 Series
Brand: Samsung Pages: 139
Samsung MFP SCX-6345N Service Manual preview
MFP SCX-6345N
Brand: Samsung Pages: 8
Samsung Lazett Combo SCX-4016 Quick Install Manual preview
Lazett Combo SCX-4016
Brand: Samsung Pages: 2
Samsung CLX-3305FW User Manual preview
CLX-3305FW
Brand: Samsung Pages: 319
Xerox Phaser 7800 Installation Manual preview
Phaser 7800
Brand: Xerox Pages: 2
Xerox Phaser 3600 Voluntary Product Accessibility Template preview
Phaser 3600
Brand: Xerox Pages: 11
Xerox CiPress 325 Customer Help Information preview
CiPress 325
Brand: Xerox Pages: 192
Xerox Phaser 6100 Instructions Manual preview
Phaser 6100
Brand: Xerox Pages: 10
Xerox DocuPrint N24 Function Manual preview
DocuPrint N24
Brand: Xerox Pages: 15
Xerox WORKCENTRE 7425 Quick Use Manual preview
WORKCENTRE 7425
Brand: Xerox Pages: 88

Brands by name

Popular brands

Load more brands