Xerox DocuPrint C621, User Manual, Page: 82 / 200

3
66
3.3 List of Items on the Menu
Screen
This section describes the settings and values available on the individual main menus.
Some items on the Menu screen can also be specified on the computer
when you are sending a print command from an application. When the
settings you specified on the computer differs from that set in the Menu
screen, the settings performed through the computer will take precedence.
The initial values refer to the values of the factory settings.
3.3.1 System
This section describes how to configure settings related to the printer itself, such as the
power saver mode and job log settings.
Power Saver
The power saver mode conserves energy when the printer is not in used. The power
saver mode settings consist of Power Save Mode 1 and Power Save Mode 2.
When the power saver mode is engaged, the "Ready/Standby" message is displayed on the
display panel. Also, the printer will take a longer time than usual to start printing after it
has received data.
You can set the duration that the printer will wait before it enters into the power saver mode.
The power saver mode is disengaged when the following situation occurs:
•
When the printer is receiving print data.
•
When the printer is printing reports or lists through 4 Report/List menu.
•
Power Save Mode 1 (Default: 15 minutes)
Specify a value from 1 to 120 minutes. When the printer is left idling for a pre-
determined period of time after a print job ended, it will enter into Power Save Mode 1.
If the power saver mode is set to "Off", Power Save Mode 1 will not be engaged.
•
Power Save Mode 2 (Default: 30 minutes)
Specify a value from 1 to 120 minutes. When the printer is left idling for a pre-
determined period of time after a print job ended, it will enter into Power Save Mode 2.
If the power saver mode is set to "Off", Power Save Mode 2 will not be engaged.