manualshive.com logo in svg

Xerox DocuPrint C621, User Manual, Page: 189 / 200

Share
Download
Xerox DocuPrint C621 User Manual Download Page 189

Appendix

173

Insert the tabs near the bottom of the right
cover into the holes in the printer ( ). Flip to
close the cover ( ).
Then slide the right cover toward the front of
the printer ( ) and close the cover completely.

Fasten the screws removed in Step   ( )
and push the manual feed unit firmly into the
printer ( ).
Close the front cover  .

This completes the installation of the additional
memory. Print the Printer Settings List and
make sure you have installed the additional
memory properly.
Proceed to configure your printer driver before
you start printing from the applications.

•

"1.8 Printing the Printer
Settings List" on how to print
the Printer Settings List.

•

"1.7 Changing the Printer
Configuration" on how to
change the printer
configuration.

Appendix G  Installing Additional Memory

Summary of Contents for DocuPrint C621









































































































































































































Reviews:

No comments