manualshive.com logo in svg

Xerox DocuPrint C621, User Manual, Page: 103 / 200

Share
Download
Xerox DocuPrint C621 User Manual Download Page 103

Troubleshooting

4

87

4.4  Print Quality Problems

4.4.2

Faded, Dirty, Uneven, Shadowed or Wrinkled Output

Description

The printed image is
faded

Black dots or stains are
printed

Possible Cause

Did you use the recommended
paper type?

Is the paper damp?

Is the drum cartridge scratched
or damaged?

Is it time to replace the toner
cartridges?

Is the 

EconoMode 

selected on

the printer driver?

Did you use the recommended
paper type? Was pre-printed
paper or inkjet paper used?

Is the drum cartridge scratched
or damaged?

Solution

Replace with paper of the
recommended size and type.

"2.1  Paper Handling"

Replace with new paper stock.

"2.2  Loading Paper"

Replace the drum cartridge.

"

6.2.2  Replacing the

Drum Cartridge"

Replace the toner cartridges.

"6.1.2   Replacing the
Toner Cartridges"

Check under the Graphics tab on the
printer driver (for Windows) or the
General Settings dialog box (for
Macintosh), and change the settings.

Online Help.

Load only recommended paper type.

"2.1  Paper Handling"

Replace with a new drum cartridge.

"6.2.2  Replacing the
Drum Cartridge"

Summary of Contents for DocuPrint C621









































































































































































































Reviews:

No comments