manualshive.com logo in svg

Xerox DocuPrint C621, User Manual, Page: 110 / 200

Share
Download
Xerox DocuPrint C621 User Manual Download Page 110

4

94

4.5  Paper Transport Problems

Description

Possible Cause

Solution

Is the paper tray specified
correctly on the printer driver?

Are the guide clips of the paper
tray in the correct positions?

Is the A3 oversize guide lifted
when loading paper other than
A3 oversize on the manual tray?

Check the paper tray setting on the
printer driver. If the optional tray
module is installed but the printer
configuration has not been changed,
trays 2 and 3 will not be able to supply
paper to the printer.  Change the
setting.

Online Help

Adjust the vertical and horizontal guide
clips of the paper tray to their correct
positions.

"2.2  Loading Paper"

Lift the A3 oversize guide when loading
paper other than A3 oversize.

"2.2.2  Loading Paper on
the Manual Tray"

(From previous page)
Paper is not fed
Paper jam
Several sheets are fed at
the same time
Paper slants when fed

Summary of Contents for DocuPrint C621









































































































































































































Reviews:

No comments