Xerox DocuPrint C621 User Manual Download Page 120

Page: 120 / 200

104

4.7 When An Error Message Appears

Message

Meaning and Solution

Load xxxx in tray N

Install tray

Close top left cover

Close the lower left cover

‚ Í
•s

The media type (xxxx) specified on the computer is not
available in all the trays.

Solution

Load xxxx (media type) in any or all of the trays.
If a wrong size is specified on the computer, stop
the printing. Make sure that the correct setting is
set on the computer, and try again.

"2.2.2 Loading Paper on the
Manual Tray",
"1.5.2 Cancelling on the Control
Panel" and
Online Help

All trays are not installed properly.

Solution

Push all trays firmly into the printer.

The top left cover is open.

Solution

Close the top left cover firmly.

The lower left cover is open.

Solution

Close the lower left cover.

"xxxx" represents paper size or paper size and orientation.

Lower left cover

Top left cover

Summary of Contents for DocuPrint C621









































































































































































































Search results

Summary of Contents for DocuPrint C621

Reviews:

Xerox DocuPrint C621, User Manual, Page: 120 / 200

Search results

Summary of Contents for DocuPrint C621

Reviews: