manualshive.com logo in svg

Xerox Document Binder 120, Operator'S Manual

Share
Download
Xerox Document Binder 120 Operator'S Manual Download Page 91

PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION

XEROX DOCUMENT BINDER 120 OPERATOR MANUAL

3-23

12.

Plug the Binder 120 Power Cord into the Binder 120 and into the
electrical wall outlet.

CAUTION:

  The ends of the Interface Cable insert into the Interface

Connectors in only one direction.

13.

Insert one end of the Interface Cable into the Interface Connector
of the Binder 120 and the other end into the Interface Connector
of the host machine.

•

Align the notched portion of each end of the Interface Cable
with the notched portion of each Interface Connector.

NOTE:

  The Output Tray of the host machine will adjust automatically

to its correct position ( if it is not already there).

14.

Press the Binder 120 Power Switch to the On ( 

I

 ) position.

0312105A-SBR

0312106A-SBR

Summary of Contents for Document Binder 120











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands