Xerox Document Binder 120, Operator'S Manual

Page: 135 / 138

TABLE OF CONTENTS
vi XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
4. Making the booklets
4-1
Booklet overview 4-1
Booklet-making overview 4-2
Determining the correct spine width 4-3
Using the Manual Feeder to determine spine width 4-3
Using the Spine Width/Sheet Capacity Table to determine spine width 4-3
Selecting the cover supply 4-4
Loading the cassettes into the Cover Trays 4-5
Determining when a Cover Tray is empty 4-5
Cover Tray currently in use empties 4-6
Cover Tray not currently in use is empty 4-6
Loading the cassettes into the Cover Trays procedure 4-7
Producing the booklets 4-9
Automatic operation (on-line mode) 4-9
Manual operation using the Cover Trays 4-10
Manual operation without using the Cover Trays 4-13
5. Customizing your Binder 120
5-1
Descriptions of the Customer Tools features 5-2
How to change the Customer Tools features 5-3
Entering the Customer Tools mode 5-3
Changing the Customer Tools features 5-4
6. Care
6-1
Helpful hints 6-1
Care of your Binder 120 6-1
Ordering supplies 6-1
Storing the cover cassettes 6-2
Cleaning the Binder 120 6-3
7. Problem solving
7-1
Locating and clearing a jam 7-2
Determining when a jam occurs in the Binder 120 7-2
Jam locator illustration 7-2
Jam clearance procedures 7-3
Area 1A 7-3
Areas 1B, 2A, 2B, 2C 7-4
Areas 3A, 3B, 3C 7-6
Areas 4A, 4B 7-8
Resetting the Ground Fault Interrupter 7-10
Manual processing of copy sets and covers removed during jam clearance 7-11
Inserting additional sheets into a bound booklet 7-12
Problem solving table 7-13