Xerox Document Binder 120, Operator'S Manual

Page: 31 / 138

PROBLEM SOLVING
7-12 XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
Inserting additional sheets into a bound book
Occasionally, you may wish to add sheets to a bound book. The
Binder 120 enables you to do so. You cannot, however, remove
pages from a bound book.
To add sheets to a bound book, perform the following procedure:
CAUTION: Do not exceed the capacity of the cover spine width of
the bound book. To determine the maximum number of sheets, refer
to set size reference chart in chapter 8, “Technical data.”
CAUTION: If you insert a new first or last sheet into the bound
book, the book may not bind properly.
1. Manually insert the sheet(s) into the bound book at the
appropriate spot(s).
?
Tamp the sheet(s) into place as neatly as you can.
2. Open the Manual Feeder door.
3. Insert the bound book into the Manual Feeder.
NOTE: Follow the directions on the labels adjacent to the
Manual Feeder area of the Binder 120 for the correct positioning
of the book.
4. Select None as the cover source from the Cover Supply section
on the Control Panel of the Binder 120.
5. Press the Manual Start button on the Control Panel of the
Binder 120.
6. Retrieve the book from the Output Tray of the Binder 120 after
the binding process has completed.
Note: Refer to chapter 4, “Making the books,” for complete
information about using the Manual Feeder.