manualshive.com logo in svg

Xerox Document Binder 120, Operator'S Manual

Share
Download
Xerox Document Binder 120 Operator'S Manual Download Page 62

MAKING THE BOOKS

4-14

XEROX DOCUMENT BINDER 120 OPERATOR MANUAL

b.

For landscape (horizontal) page orientation, insert the copy
set so that the top page of your copy set faces the front of
the cover and the cover spine is to the left of the top of the
pages (as the word 

Xerox

 is shown in the figure).

3.

Open the Manual Feeder Door.

4.

Insert the copy set with the cover into the Manual Feeder
according to the page orientation, step a or step b.

a.

For portrait (vertical) page orientation, insert the copy set
with the cover so that the top page of your copy set faces
the right side of the Binder 120 (as the word 

Xerox

 is

shown in the figure) and the cover spine faces downward
into the Manual Feeder.

NOTE:

  Follow the orientation labels on the Manual Feeder

area of the Binder 120.

0312039B-SBR

Summary of Contents for Document Binder 120











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands